tsm-type-dewatering-centrifuge.png

The TSM type centrifugal separator is a dehydration type separator that saves labor, resources, and energy, and the TBD type centrifugal separator is a condensation type separator.

Application

  • Private sewage system sludge
  • Film treatment sludge
  • High-load sludge
  • Sludge after residue removal
  • Community plant sludge
  • Refuse leachate sludge
  • Rural community wastewater sludge
  • Livestock wastewater sludge
  • OD sludge
  • General industrial wastewater sludge
  • Digested sludge
  • Drinking water sludge

Our centrifugal dehydrators and condensers have been widely used in sewage treatment plants for the purpose of reducing the volume of sludge.
Unlike large equipment for sewage treatment plants, this TSM type centrifugal dehydrator is designed as a centrifugal separator for small and medium-scale treatment plants, such as night soil treatment plants, rural community wastewater treatment facilities, refuse disposal sites, livestock wastewater treatment facilities, and community plants. TSM stands for "Three Save Mechanism," which means that it saves labor cost, resources, and energy.

  1. Downsizing

    As a result of efforts to reduce installation space and the adoption of a common frame, this centrifugal separator has achieved a reduction of about 30% in size compared with conventional centrifugal separators.

  2. Low noise

    Noise has been reduced by improving the rotary bodies and the drive-related systems.
    Using a sound-proof cover as an option can reduce the noise level to below 80 dB (Scale A).

  3. Easy to install

    Little time is needed to install the centrifugal separator because it uses the minimum necessary number of anchor bolts.

  4. Considerably reduced power consumption

    The centrifugal separator has achieved a 20 to 40% reduction in power consumption compared to conventional centrifugal separators.

  5. Considerably reduced repair costs

    Tile chips with outstanding wear resistance are used for the screw conveyor. They make the centrifugal separator more wear-retardant than conventional centrifugal separators, resulting in considerably reduced repair costs. They also use fewer consumables than conventional centrifugal separators.

  6. High dehydration and condensation performance

    The newly designed dehydration and condensation units have achieved a low water content and a high recovery rate in the dehydrator, as well as a higher concentration and high recovery rate of thick sludge in the condenser.