status-instruments-accessories-usb-configurator-usb-lead-usbx-config-usb-ttx-config-1-2-bsp-compression-fitting-1-4-bsp-compression-fitting-rmk-1g-phu-kien-status-dai-ly-status-viet-nam.png

USB Configuration Kit - Configuration Hardware

Product Image

The USB configuration kit provides a link between the USB port of your PC or Lap-Top and all of our products that use loop communication.  The product, as well as the configurator, is powered during configuration from your PC's USB port so no additional power supply is needed during the configuration process. 

Free software to use with all our programmable products is available from the downloads section on our main web site.

Products that need this device are
SEM206P
TTR200
TTC200
SEM210
HTR200
HTR201
STA206
SEM1603
SEM1801
SEM1802
SEM161
SEM162

USB Lead - For Configuration Of Our Products With A USB Port

Product Image

This simple USB lead is used for configuration of our products which have our USB interface built in.  The lead is used to connect the USB port of your Lap-Top or PC to the USB port in the product.  

The product is powered during configuration from the USB port of your computer. This also means the product doesn't need to be wired to a power supply for configuration which is ideal for quick set up prior to installation.

Free configuration software for this product is available from the downloads section on our main web site.


This standard USB lead is required to configure all our products that have an on board USB port.

USBX Config - Atex / IECEx Approved Config Lead For SEM210X and SEM310X

Product Image

In order to comply with the latest standards, a 'fuse protected shunt zener assembly' is required when configuring between the transmitter and the PC. This is to be used for configuration in the Safe Area

USB TTX Config - ATEX / IECEx Approved Config Lead for TT200 and SEM1800 Series

Product Image

In order to comply with the latest standards, a 'fuse protected shunt zener assembly' is required when configuring between the transmitter and the PC. This is to be used for configuration in the Safe Area

USB TTX Config - ATEX / IECEx Approved Config Lead for TT200 and SEM1800 Series

Product Image

In order to comply with the latest standards, a 'fuse protected shunt zener assembly' is required when configuring between the transmitter and the PC. This is to be used for configuration in the Safe Area

Compression Fitting - 1/2" BSP Compression Fitting

Product Image

These 1/2" BSP compression fittings allow for an adjustable immersion length when used with style 2 or 4 probes.

Compression Fitting - 1/4 BSP Compression Fitting

Product Image

These 1/4" BSP compression fittings allow for an adjustable immersion length when used with style 2 or 4 probes. 

RMK1-G - G Rail Mount Clips For In Head Temperature Transmitters

Product Image

The RMK1-G allows the user to mount a in-head temperature transmitter onto a G profile DIN rail.