Centrifugal pumps CN, CSK, CS-CSK, CSM, CSDCSD, CV

Flow rates up to 75 m3/h, heads of more than 60 m.
Maximum inlet pressure : 4 bar.
Temperature range: -10°C to 120°C.
Seals:
Hygienic mechanical seals with seats to EN 12756, ISO 3069
standards.
Elastomers (certified to US FDA):
EPDM
Fluorocarbon (Viton)
Silicone
P.T.F.E. (FEP)
Connections:
DIN - SMS - IDF - BS / RJT - DS - CLAMP and EN
1092-1 PN16 flanges and on request available for other
international standards.

Applications
Food processing, dairy, beverage, chemical, cosmetics and pharmaceutical
industries. The open impeller allows a large range of
products such as purified water, juices, creams, ice-cream mix,
milk, wine, spirits, whey and WFI to be safely transferred.

 

For aggressive products and environments, CS pumps can on
special request, be manufactured in the following materials:
• Sanicro 28 (1.4563)
• Duplex SAF 2507 (1.4410)
• Hastalloy C276

Elastomers (certified to FDA): EPDM Fluorocarbon (Viton) Silicone P.T.F.E. (Fep)

Connections: DIN - SMS - IDF - BS / RJT - DS - CLAMP and EN 1092-1 PN 16 flanges suitable for all international standards. 

Flow rates up to 300 m3 /h, heads up to 100 m (10 bar); high performance, with low NPSH values. The clamp casing and seal design allows quick disassembly for inspection, cleaning and maintenance. For aggressive products and environments, CSD pumps can on special request, be manufactured in the following materials:

Elastomers (certified to FDA): EPDM Fluorocarbon (Viton) P.T.F.E. (Fep) Connections: EN 1092-1 PN 16 flanges.

Flow rates range from 0 to 570 m3/h, heads up to100 m (10 bar);
high performance, with low NPSH requirements.
The clamp casing and seal design allows quick disassembly for
inspection, cleaning and maintenance. It also enables the delivery
port to be rotated to any position for easy installation (not on
sizes 125 to150).
For aggressive products and environments, CSK pumps can on
special request, be manufactured in the following materials:
• Sanicro 28 (1.4563)
• Duplex SAF 2507 (1.4410)
• Hastalloy C276
EPDM
Fluorocarbon (Viton)
Silicone
P.T.F.E. (Fep)
Connections:
DIN - SMS - IDF - BS / RJT - DS - CLAMP and EN 1092-1
PN16 flanges to suit most international standards.

Flow rates up to 50 m3/h, heads up to 150 m (15 bar) for the
multistage versions.
Flow rates up to 150 m3/h, heads up to 60 m (6 bar) for the
single-stage versions.
Design pressure 40 bar.
Temperature range: 0 to 100°C.
Available in three different versions.
Standard CSM: Close coupled design using a standard motor, with
a separate pump shaft supported by bearings.
“X” version: Close coupled to a standard motor, with a foot
mounted housing containing single or double shaft support
bearings.
“K” version: Designed with a separate pedestal containing double
shaft support bearings, for use with a flexible coupling and
mounting on to a base plate.

Elastomers (certified to FDA)

EPDM

Fluorocarbon (Viton)

Connections: Flanges EN 1092-1 PN 40 Clamp for high pressures DIN 11851 / 11864-1 up to 25 bar