apiste-panel-cooling-units-enc-2800hl-heat-resistant.png

Side-mount

Side-mount

The ENC-HL series is the first heat resistant panel cooler unit in the industry to be able to provide cooling capabilities with super high external temperatures of up to 70℃. These were developed to cool down control panels installed near furnaces and places with lots of metal-related items which get hot, as well as control panels installed near the ceiling of factories which also become hot, etc. In order to support the various problems which occur in high temperature environments, we developed the new "suction cooling type" cooling cycle. This includes an automatic expansion valve which automatically adjusts pressure inside coolant pipes according to external air fluctuations in the liquid injection path installed on large type cooler units. The perfect cooling cycle can be realized even in high temperature environments, and the compressor won't stop due to heavy loads, so cooling can be done smoothly. In addition to the internal malfunction alarm system equipped on traditional cooler units, it also contains compressor operation signal, compressor overcurrent warning, compressor temperature abnormality warning, etc., to alert you immediately just in case a malfunction occurs.

Specifications

Mount Type Side-mount
Cooling Capacity (W) 2500/2800
Setting Temperature Range (°C) 30 to 70
Use Area Temperature (°C) 30 to 70
Use Area Humidity (%RH) 10-85(-45℃)、10-45(-55℃)、10-30(-65℃)、10-20(-70℃)
External Dimensions (mm) H1455×W480×D260
Volume (kg) 72
Coating Color Color Munsell 5Y7 / 1 light beige
Voltage Rating (V) Three phase AC200
Consumption Current/Rating (A) (At 35 ℃ ambient temperature) 5.0/5.2
Consumption Current/MAX (A) (At 70 ℃ ambient temperature) 6.9/7.3
Starting Current (A) 30
Consumption Voltage/Rating (W) (At 35 ℃ ambient temperature) 1000/1190
Consumption Voltage/MAX (W) (When the outside air temperature of 70 ℃) 1800/2150
Noise Resistance 1.5kV (50ns, 1μs, common pulse width, Normal mode, caused by noise simulator)
Vibration Resistance 5Hz frequency 20mm total amplitude
Dust & Water Protection Grade Equivalent to IP54 (internal circulation route)
Coolant / Filling (g) HFC-134a 933g
Noise (dB) 67/72
External Output Compressor operation. Temperature anomaly in the panel. Compressor overcurrent. Abnormally high temperature compressor. Abnormal pressure compressor (250V 2A). Relay output.
Display Power (white), Operation (green), Alarm (red) Lamp display

Parts list supplied

Mounting Bolt 6 (M8 x L25)
Exhaust Hose 3m (high mid-oil hose)
Hose Band 1
Washer 2
Spacer 6
Wind Direction Louver 1
Eye Bolt 2 (M10)
Louvered Screw 2
User Manual 1

Maintenance Parts List

Internal Circulation Fan Circulation fan for 2800HL
External Fan Air fan for 2800HL
Filter ENC-F-16 * 2

[Note]
Please use it properly Read the manual before using.
Delivery of the items will be passed on the car. (Domestic location specified, except islands)
Will be (additional cost) Charter flights handled separately by the number-type.
Overseas at the time of delivery, we recommend packing for overseas separately.
Please check through the cooler between the FA and the power (circuit breakers) to the appropriate specification of the FA breaker cooler.
Cause of failure and be used at the rated power supply out of range.
Please to the service and maintenance on a regular basis.
Failure to maintain regular maintenance, you may be a factor in product performance degradation trouble.
To low ambient temperatures in winter, please do not let the FA cooler continuous operation.
When disposing of this product, you should comply with various laws and regulations, please go to the appropriate.

Dimensions

3m length outside the machine code: the power supply line (1)
3m length of the outside of code: line operation and alarm output (2)
Alarm output line operation and (2) is, in fact, each output line of the temperature anomaly in the Van / overcurrent compressor / compressor abnormal temperature / pressure abnormality compressor / compressor operation has come out.

Cut-mounting

Standard panel cut (left)
Diagram is viewed from the outside control panel.
When processing, please keep the thread pitch.
There are (with some exceptions), the panel cut dimensions can be changed without prior notice minimum standard panel cut, but will not change even after the model change.
minimum cut panel (right)

ability characteristic graph

68_ext_07_en_0_S.png